If you could repair a flat tire, the very first thing to do is take away the wheel. This text teaches you the right way to take away a rear wheel that’s hooked up by a via axle. (You probably have a quick-release axle, see the how-to particulars right here.)
Store fitnessinf’s collection of bikes.
Video: Bike Upkeep: Take away a Rear Wheel with a Via Axle
Eradicating the Wheel
First, put your bike in a restore stand and shift the chain to the smallest cog. If you happen to’re in the midst of your trip or you do not have a motorcycle stand, you may flip the bike the other way up to work on it. Shifting to the smallest cog will assist the wheel slide out extra simply.
In case your derailleur has a clutch that will increase stress on the chain, flip it off.
Subsequent, loosen the lever on the axle and spin it counterclockwise till all of the threads are utterly free. Help the wheel and pull the axle out.
To get the wheel out easily, pull down on the tensioning arm and again on the physique of the derailleur. The wheel ought to slide proper out.
Reinstalling the Wheel
While you’re accomplished together with your work, it is time to fitnessinfnstall the wheel. Begin by including a skinny movie of grease to the threads on the axle.
Get the derailleur out of the best way by pulling it down and again. It additionally helps to verify one of many smallest cogs engages with the higher part of chain.
Examine that the wheel is absolutely seated within the dropouts earlier than fitnessinfnstalling the axle.
Now fitnessinfnstall the axle. If the axle does not slide in easily on the primary strive, take away it and verify the wheel’s alignment earlier than making an attempt once more. Screw within the axle and shut the lever. Be certain it is tucked out of the best way and is not touching the bike’s body.
If the lever closes too simply and is touching the body, it is in all probability not tight sufficient. Open the lever and tighten the axle. Then verify every part once more.
In case your derailleur has a clutch, flip it again on.
End by spinning the pedals and ensuring that the gears shift usually.
